All of our WA series washers are compatible with the IndigoVision Interceptor dome. Simply connect the washer to the 24vac* power supply and connect the CONTROL input on the washer to the RELAY output on the camera and you are good to go. A special washer jet mounting bracket is […]
For Hikvision domes that have a wiper and feature an alarm output using a WA series washer could not be easier. All you need is the twin-jet mount and then you are all set. Use the alarm output to connect directly to the control input on the washer PSU. You […]
The most common reason for this is when you are using the switching power method to turn the washer on or off. If you are sure you are getting power to the unit correctly (and other factors such as fuses have been ruled out) have you checked to see if […]
ITS Products Limited has developed a version of the WA10 washer specifically for use with the Panasonic AeroPTZ (WV-SUD638). The washer has been been adapted to simplify the physical and electrical integration between the dome and the washer. A copy of the manual for the washer will be available in the […]
If a screen is dirty the camera/lens if working in auto-focus mode will try and near focus on specs of dirt. The camera will try and fight that as clearly you are trying to view further than a few centimetres. The tiny lens drive motors are not designed to keep […]
As standard all of our products have a 2-year warranty. This warranty is against manufacturing failure and has a couple of common-sense exclusions on the hose, the nozzle and the bottle. All warranties on a back-to-base basis.
Yes. All our products are designed by us on Solidworks 3D CAD software. We can provide you with simple PDF line drawings (some available on the site already) or any number of other formats including DXF, DWG, eDrawing etc. Email sales@its-products.co.uk with your requirements and we will see how we […]
We would always recommend that the washer control function is set to momentary, or at the very least timed. Setting it to latching can result in the operating forgetting it is on and running the bottle out of water. Although the float switch feature will prevent the pump from burning […]
There is no strict routine maintenance that needs to be observed for the WA series washers. It is good practise to check the bottle for any algae build up, although this should be minimal if you are using a screen wash. You should also check that the hose is properly […]
The WA series washer integrates perfectly with the Predator domes from 360VisonTechnology. You will need to choose a 230/230vac version as the Predator PSU with washer output uses a mains voltage relay to turn on and off the washer unit. If you let us know that you are using a […]
Error: Could not authenticate you.
