WA-25-S


  • Product Details
  • Additional Information
  • Contact Us
  • FAQs

Self-priming screen washer. 25 litre water container. Available in 24v or 230vac

  • 12m Head Pumping Height
  • Stainless Steel Construction
  • 25 Litre Reservoir Capacity
  • UV-Stable Water Container
  • Black UV-Stable Hose
  • Brass (Chrome-Plated) Twin-Jet Nozzle
  • Low-Water Cut-Off Switch
  • Alarm Output OPTION
  • Pre-Wired Connectors


ITS Products designs and manufactures all of its products in the United Kingdom. We are always happy to discuss your specific requirements if our standard format does not meet your exact needs.


WA-25-S Washer Downloads

Datasheet WA-x-S Washer Datasheet
Manual WA-x-S Washer Manual
Drawing WA-25-S Drawing

Category: CCTV Screen Washers
Sub-Categories:
Tags: Washer,CNI,Perimeter,Wiper

Product Inquiry Form

    Your Name (required)

    Your Email (required)

    Inquiry Product Name

    Your Message

    WA-25-S

    The most common reason for this is when you are using the switching power method to turn the washer on or off. If you are sure you are getting power to the unit correctly (and other factors such as fuses have been ruled out) have you checked to see if you have bridged the CONTROL inputs on the washer PSU. In the image a loop of tinned copper wire has been used.

    Bridging the control inputs on washer PSU

    These CONTROL connectors are only used to connect a device such as a telemetry receiver.

    For more information download the manual from the product information page here.

    If a screen is dirty the camera/lens if working in auto-focus mode will try and near focus on specs of dirt. The camera will try and fight that as clearly you are trying to view further than a few centimetres.

    The tiny lens drive motors are not designed to keep working 24/7 and this will have an impact on their MTBF.

    Having a clean screen will prevent this.

    The WA series washer units should be mounted below the camera or water jet output. If this is not possible then the water will drain out of the water reservoir after the pump has been activated. Its called siphoning.

    We can offer an anti-siphon device which requires connection to the WA series washer. Contact our sales department for details.

    Tag: Functional