• Product Details
  • Additional Information
  • Contact Us
  • FAQs

Self-priming screen washer. 10 litre water container. Available in 24v or 230vac

  • 12m Head Pumping Height
  • Stainless Steel Construction
  • 10 Litre Reservoir Capacity
  • UV-Stable Water Container
  • Black UV-Stable Hose
  • Brass (Chrome-Plated) Twin-Jet Nozzle
  • Low-Water Cut-Off Switch
  • Alarm Output OPTION
  • Pre-Wired Connectors

ITS Products designs and manufactures all of its products in the United Kingdom. We are always happy to discuss your specific requirements if our standard format does not meet your exact needs.

WA-10-S Washer Downloads

Datasheet WA-x-S Washer Datasheet
Manual WA-x-S Washer Datasheet
Drawing WA-10-S Drawing

Category: CCTV Screen Washers
Tags: Washer,CNI,Perimeter,Wiper

Product Inquiry Form

    Your Name (required)

    Your Email (required)

    Inquiry Product Name

    Your Message


    All of our WA series washers are compatible with the IndigoVision Interceptor dome.

    Simply connect the washer to the 24vac* power supply and connect the CONTROL input on the washer to the RELAY output on the camera and you are good to go.

    A special washer jet mounting bracket is available for the Interceptor dome. This optimises the position of the adjustable twin-jet water output for the Interceptor dome.

    *Please ensure you have a 24vac washer unit of course

    For Hikvision domes that have a wiper and feature an alarm output using a WA series washer could not be easier. All you need is the twin-jet mount and then you are all set. Use the alarm output to connect directly to the control input on the washer PSU. You can activate the washer using that either from the Hikvision DVR or VMS.

    Drawing : Washer jet mount for Hikvision domes

    Tags: Hikvision, Washer

    The most common reason for this is when you are using the switching power method to turn the washer on or off. If you are sure you are getting power to the unit correctly (and other factors such as fuses have been ruled out) have you checked to see if you have bridged the CONTROL inputs on the washer PSU. In the image a loop of tinned copper wire has been used.

    Bridging the control inputs on washer PSU

    These CONTROL connectors are only used to connect a device such as a telemetry receiver.

    For more information download the manual from the product information page here.

    ITS Products Limited has developed a version of the WA10 washer specifically for use with the Panasonic AeroPTZ (WV-SUD638).

    The washer has been been adapted to simplify the physical and electrical integration between the dome and the washer.

    A copy of the manual for the washer will be available in the download section.

    Exclusively available from Panasonic throughout Europe please contact your local office for more details.

    If a screen is dirty the camera/lens if working in auto-focus mode will try and near focus on specs of dirt. The camera will try and fight that as clearly you are trying to view further than a few centimetres.

    The tiny lens drive motors are not designed to keep working 24/7 and this will have an impact on their MTBF.

    Having a clean screen will prevent this.

    As standard all of our products have a 2-year warranty. This warranty is against manufacturing failure and has a couple of common-sense exclusions on the hose, the nozzle and the bottle.

    All warranties on a back-to-base basis.


    All our products are designed by us on Solidworks 3D CAD software. We can provide you with simple PDF line drawings (some available on the site already) or any number of other formats including DXF, DWG, eDrawing etc.

    Email sales@its-products.co.uk with your requirements and we will see how we can help.

    Tags: CAD, Solidworks

    We would always recommend that the washer control function is set to momentary, or at the very least timed.

    Setting it to latching can result in the operating forgetting it is on and running the bottle out of water. Although the float switch feature will prevent the pump from burning out it will mean that you need to go and refill it far more often than you had planned.

    There is no strict routine maintenance that needs to be observed for the WA series washers.

    It is good practise to check the bottle for any algae build up, although this should be minimal if you are using a screen wash. You should also check that the hose is properly connected to the twin jet and the output spout.

    The WA series washer integrates perfectly with the Predator domes from 360VisonTechnology.

    You will need to choose a 230/230vac version as the Predator PSU with washer output uses a mains voltage relay to turn on and off the washer unit.

    If you let us know that you are using a Predator dome we can supply a special washer jet mount too.

    Yes. We would certainly recommend a suitably diluted screen wash or anti-freeze additive in the water reservoir.

    Allowing water to freeze in the water reservoir can cause the bottle to crack, just like on your car screen washer reservoir. Check the manufacturers recommendations for details of the dilution.

    Always ensure you label the water reservoir correctly to reflect the use of poisonous substance.

    The WA series washer units should be mounted below the camera or water jet output. If this is not possible then the water will drain out of the water reservoir after the pump has been activated. Its called siphoning.

    We can offer an anti-siphon device which requires connection to the WA series washer. Contact our sales department for details.

    Tag: Functional