WA series CCTV Camera Washers


WA Series Washer

The WA series CCTV camera washer is designed and manufactured in the UK. It is available with a number of options to accommodate nearly every type of security installation.

The WA series CCTV washer forms a critical part of any CCTV installation where there is dirt or atmospheric contaminates. Without the use of a washer (and wiper) picture degradation starts from the very first day on installation.

The WA series CCTV washer have been designed with ease of installation and minimal service overhead in mind. The plug-in connectors allows the water bottle to be removed from the cradle and taken elsewhere for filling up. This is not just convenient but where the washer is installed near other electrical equipment an absolute necessity.

WA5 24vac
All our washers now come with float switches as standard

WA5 24vac
The compact size allows the 5-litre unit to be mounted on or even in CCTV columns

WA5 24vac
The water reservoir is easily removed allowing it to be refilled elsewhere

WA10 24vac
The stainless steel frame provides excellent corrosion resistance

WA10 220-230vac
The 220-230vac PSU can connect directly to Predator domes

WA10 220-230vac
The pump and float switch connect to the PSU via pre-wired IP68 connectors.

WA25 24vac
24vac can mount on either the side or the front

WA25 220-230vac
The 220-230vac PSU can also accommodate the RS485 option.

* Protects camera image quality* Reduces camera maintenance intervals
* Extends lens life* Simple installation
* Self-priming* Control via analogue or IP systems
* Optional RS485 control* Suitable for corrosive environments
* Standard frame 304 grade stainless steel* Optional 316L grade stainless steel frame
* Capable of pumping 12m vertically* Supplied with hose and washer jet
* Available in variety of voltages (24vdc, 24vac, 220/230vac)* Two-year warranty

WA Downloads

 WA5WA10WA25
Datasheet WA Series Washer Datasheet WA Series Washer Datasheet WA Series Washer Datasheet
Manual WA Series Washer Install Guide WA Series Washer Install Guide WA Series Washer Install Guide
Drawing WA5 Washer Drawing WA10 Washer Drawing WA25 Washer Drawing
Options/Extras RS485 Option

Frequently Asked Questions

CCTV Washer Units - Integration

All of our WA series washers are compatible with the IndigoVision Interceptor dome.

Simply connect the washer to the 24vac* power supply and connect the CONTROL input on the washer to the RELAY output on the camera and you are good to go.

A special washer jet mounting bracket is available for the Interceptor dome. This optimises the position of the adjustable twin-jet water output for the Interceptor dome.

*Please ensure you have a 24vac washer unit of course

For Hikvision domes that have a wiper and feature an alarm output using a WA series washer could not be easier. All you need is the twin-jet mount and then you are all set. Use the alarm output to connect directly to the control input on the washer PSU. You can activate the washer using that either from the Hikvision DVR or VMS.

Drawing : Washer jet mount for Hikvision domes

 

ITS Products Limited has developed a version of the WA10 washer specifically for use with the Panasonic AeroPTZ (WV-SUD638).

The washer has been been adapted to simplify the physical and electrical integration between the dome and the washer.

A copy of the manual for the washer will be available in the download section.

Exclusively available from Panasonic throughout Europe please contact your local office for more details.

The WA series washer integrates perfectly with the Predator domes from 360VisonTechnology.

You will need to choose a 230/230vac version as the Predator PSU with washer output uses a mains voltage relay to turn on and off the washer unit.

If you let us know that you are using a Predator dome we can supply a special washer jet mount too.

Load More