WA Series Washer
The WA series CCTV camera washer is designed and manufactured in the UK. It is available with a number of options to accommodate nearly every type of security installation.
The WA series CCTV washer forms a critical part of any CCTV installation where there is dirt or atmospheric contaminates. Without the use of a washer (and wiper) picture degradation starts from the very first day on installation.
The WA series CCTV washer have been designed with ease of installation and minimal service overhead in mind. The plug-in connectors allows the water bottle to be removed from the cradle and taken elsewhere for filling up. This is not just convenient but where the washer is installed near other electrical equipment an absolute necessity.
|* Protects camera image quality||* Reduces camera maintenance intervals|
|* Extends lens life||* Simple installation|
|* Self-priming||* Control via analogue or IP systems|
|* Optional RS485 control||* Suitable for corrosive environments|
|* Standard frame 304 grade stainless steel||* Optional 316L grade stainless steel frame|
|* Capable of pumping 12m vertically||* Supplied with hose and washer jet|
|* Available in variety of voltages (24vdc, 24vac, 220/230vac)||* Two-year warranty|
|Datasheet||WA Series Washer Datasheet||WA Series Washer Datasheet||WA Series Washer Datasheet|
|Manual||WA Series Washer Install Guide||WA Series Washer Install Guide||WA Series Washer Install Guide|
|Drawing||WA5 Washer Drawing||WA10 Washer Drawing||WA25 Washer Drawing|
Frequently Asked Questions
CCTV Washer Series - General
If a screen is dirty the camera/lens if working in auto-focus mode will try and near focus on specs of dirt. The camera will try and fight that as clearly you are trying to view further than a few centimetres.
The tiny lens drive motors are not designed to keep working 24/7 and this will have an impact on their MTBF.
Having a clean screen will prevent this.
As standard all of our products have a 2-year warranty. This warranty is against manufacturing failure and has a couple of common-sense exclusions on the hose, the nozzle and the bottle.
All warranties on a back-to-base basis.
All our products are designed by us on Solidworks 3D CAD software. We can provide you with simple PDF line drawings (some available on the site already) or any number of other formats including DXF, DWG, eDrawing etc.
Email firstname.lastname@example.org with your requirements and we will see how we can help.
There is no strict routine maintenance that needs to be observed for the WA series washers.
It is good practise to check the bottle for any algae build up, although this should be minimal if you are using a screen wash. You should also check that the hose is properly connected to the twin jet and the output spout.