WA Series Washer
The WA series CCTV camera washer is designed and manufactured in the UK. It is available with a number of options to accommodate nearly every type of security installation.
The WA series CCTV washer forms a critical part of any CCTV installation where there is dirt or atmospheric contaminates. Without the use of a washer (and wiper) picture degradation starts from the very first day on installation.
The WA series CCTV washer have been designed with ease of installation and minimal service overhead in mind. The plug-in connectors allows the water bottle to be removed from the cradle and taken elsewhere for filling up. This is not just convenient but where the washer is installed near other electrical equipment an absolute necessity.
|* Protects camera image quality||* Reduces camera maintenance intervals|
|* Extends lens life||* Simple installation|
|* Self-priming||* Control via analogue or IP systems|
|* Optional RS485 control||* Suitable for corrosive environments|
|* Standard frame 304 grade stainless steel||* Optional 316L grade stainless steel frame|
|* Capable of pumping 12m vertically||* Supplied with hose and washer jet|
|* Available in variety of voltages (24vdc, 24vac, 220/230vac)||* Two-year warranty|
|Datasheet||WA Series Washer Datasheet||WA Series Washer Datasheet||WA Series Washer Datasheet|
|Manual||WA Series Washer Install Guide||WA Series Washer Install Guide||WA Series Washer Install Guide|
|Drawing||WA5 Washer Drawing||WA10 Washer Drawing||WA25 Washer Drawing|
Frequently Asked Questions
CCTV Washer Units - Functional
The most common reason for this is when you are using the switching power method to turn the washer on or off. If you are sure you are getting power to the unit correctly (and other factors such as fuses have been ruled out) have you checked to see if you have bridged the CONTROL inputs on the washer PSU. In the image a loop of tinned copper wire has been used.
These CONTROL connectors are only used to connect a device such as a telemetry receiver.
For more information download the manual from the product information page here.
We would always recommend that the washer control function is set to momentary, or at the very least timed.
Setting it to latching can result in the operating forgetting it is on and running the bottle out of water. Although the float switch feature will prevent the pump from burning out it will mean that you need to go and refill it far more often than you had planned.
The WA series washer units should be mounted below the camera or water jet output. If this is not possible then the water will drain out of the water reservoir after the pump has been activated. Its called siphoning.
We can offer an anti-siphon device which requires connection to the WA series washer. Contact our sales department for details.